花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献   

Quantitative prediction of discrete element models on complex loading paths     

Luc Sibille  Pascal Villard  Félix Darve  Rodaina Aboul Hosn 《国际地质力学数值与分析法杂志》2019,43(5):858-887

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.  相似文献   

SIMULATION STUDY OF ROAD-CUT EFFECTS ON SLOPE STABILITY     

CHEN Xiao-li  WANG Ming-ming  ZHANG Ling 《地震地质》2018,40(6):1390-1401

Landslides and rock falls along the highway are common geological hazards in Southwest China. As an influencing factor on potential landslides behavior, roads or distance to roads have been successfully used in landslide susceptibility assessments in mountainous area. However, the relationship between the road-cut and the slope stability is not clear. Therefore, we performed two-dimensional slope stability calculation using the general limit equilibrium (GLE)method incorporated in the software SLOPE/W of GeoStudio for stability analysis of slopes. Our studies show that the man-made roads influence on the slope stability mainly exists in two ways:One is to create a new steep slope, which will result in rock falls and shallow landslides along the roads; the other is to influence the stability of the original slope, which will result in comparatively huge landslides. For the latter, our simulation study reveals that the road location, namely at which part of a natural slope to construct a road is important for the slope stability. For a natural slope with a potential slip surface, if a road is constructed at or near the slope toe where the potential slip surface surpasses, it will greatly degrade the slope's factor of safety (Fs) and make the slope unstable; however, if a rode-cut is near the top of the slope, it will increase the slope's Fs and make the slope more stable. The safety location is different for different slope angle, steeper slope needs a higher location for a safety road-cut in comparison with gentle slopes. Moreover, the slope stability decreases when loading a seismic force and it varies with the slope angle. Firstly, the Fs decreases when the slope angle increasing, and when the slope angle reaches 45°, the Fs then becomes greater with the slope angle increasing.  相似文献   

基于多源遥感数据的日本海内波特征研究   总被引：2，自引：1，他引：1  

孙丽娜  张杰  孟俊敏  王晶  张旭东 《海洋学报》2018,40(3):102-111

日本海特殊的地理位置和复杂的地形使得该海域内波表征极为复杂，遥感是大范围观测内波的有效手段，已被广泛应用于内波的探测研究。本文利用MODIS、GF-1和ENVISAT ASAR遥感影像，开展了日本海内波特征研究。通过提取内波波峰线，生成了日本海内波空间分布图；获取了内波的波峰线长度和传播速度，并基于非线性薛定谔方程反演了内波振幅。研究结果表明，日本海内波分布范围宽广，不仅大陆架沿海区内波分布密集，深海盆地也探测到了大量内波；日本海北部45°N附近海域有少量内波出现，利用高分影像探测到朝鲜陆架浅海区有大量小尺度内波，大和海盆、大和隆起的西南部海域没有发现内波。日本海内波波峰线长达100多千米，深海区的传播速度大于1 m/s；浅海区内波振幅约10 m左右，深海区可达60 m以上。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames     

Cheng Fang  Yiwei Ping  Yiyi Chen 《地震工程与结构动力学》2020,49(2):155-174

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.  相似文献   

Response and capacity of monopod caisson foundation under eccentric lateral loads     

Tanmoy Kumar Deb  Baleshwar Singh 《Marine Georesources & Geotechnology》2018,36(4):452-464

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.  相似文献   

Effects of variation in loading protocol on the strength and deformation capacity of ductile reinforced concrete beams     

Kai J. Marder  Christopher J. Motter  Kenneth J. Elwood  G. Charles Clifton 《地震工程与结构动力学》2018,47(11):2195-2213

Understanding the impact of prior earthquake damage on residual capacity is important for postearthquake damage assessment of buildings; however, interpretation of such impact is challenging when based on tests using traditional reversed‐cyclic loading protocols. A new loading protocol, consisting of a dynamic earthquake displacement history followed by quasi‐static reversed‐cyclic loading to failure, is presented as an alternative to traditional simulated seismic loading protocols. Data are analyzed from a set of 12 nominally identical ductile reinforced concrete beams that were tested by using variations of this protocol and traditional reversed‐cyclic and monotonic protocols. Differences in the cycle content of the earthquake displacement histories applied to the test specimens allowed for the effects of load history variation below 2.2% drift to be isolated. It is found that such variation had no effect on the beam deformation capacities. The effects of dynamic loading rates are also analyzed and compared against control quasi‐static specimens. Relative strength increases due to dynamic loading are found to be more significant at yield than at ultimate. Dynamic loading rates led to modest reductions in the beam deformation capacities, but the presence of causality between these variables remains uncertain.  相似文献   

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes     

Qi Yang  Guanglai Pan  Quandi Wang 《Marine Georesources & Geotechnology》2018,36(7):781-794

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.  相似文献   

安达曼海内孤立波的潜标观测分析研究          下载免费PDF全文

崔子健  梁楚进  蔺飞龙  金魏芳  丁涛  王隽 《海洋学研究》2020,38(4):16-25

安达曼海是内孤立波生成最多的海域之一,目前对其研究大多基于卫星遥感,缺乏基于现场观测资料的相关研究。本文通过2016年至2017年布放在安达曼海中部的锚系潜标对该海域内孤立波的方向和强度进行研究,结果表明在研究区域内孤立波主要向东北方向传播,最大振幅可达100 m。应用彻体力理论预测了研究海域内孤立波波源的分布,与遥感统计结果基本一致,并且波源位置更精确,可直观地给出不同波源激发内孤立波的能力。本文分别用浅水方程、深水方程和有限深方程对安达曼海中部内孤立波相速度进行模拟,结合卫星遥感分析发现该海域内孤立波的产生符合Lee波机制,在三种方程中有限深方程的模拟效果与潜标观测最相符。  相似文献